å
For information on how CPM is ensuring safety during the COVID-19 crisis, click here.
Lump Breakers & Crushers
Gladiator

The Gladiator is a lump breaker designed for demanding size reduction and grinding applications—and for 24-hour operation. Available in low or high speeds from 7.5 HP to 30 HP, the Gladiator Lump Breaker can handle particle sizes from several inches to 100 microns. Built with abrasion-resistant parts, the Gladiator will deliver.

  • Carbon steel construction
  • Replaceable half-inch thick carbon steel over-tip-hook rotor blades
  • Carbon steel wear liners
  • Emergency stop protection
  • Rotor Shaft with provisions for air purge, lip seals and oil bath
  • Four-bolt tapered roller bearings
  • Gravity bottom discharge
  • Direct-coupled drive
  • Easy-to-assemble rotors
  • Stainless steel contact points
  • Discharge screen for particle size control
  • Electronic shear pin for jam protection

Specifications and Dimensions

U.S. Metric
ModelCapacity TPHParticle SizeHP
500 x 50040-6080-90% < 3/8 in10-20 (6 pole) motor per shaft
550 x 70060-9080-90% < 3/8 in10-25 (6 pole) motor per shaft
740 x 70090-12080-90% < 3/8 inUp to 30 (6 pole) motor per shaft
740 x 1,225150-22580-90% < 3/8 inUp to 30 (6 pole) motor per shaft
965 x 700120-18080-90% < 3/8 inUp to 30 (6 pole) motor per shaft
965 x 1,225200-30080-90% < 3/8 inUp to 30 (6 pole) motor per shaft


Request a Test

See for yourself what our equipment can do. Send us a sample and we'll provide a detailed analysis of the recommended equipment specifications and horsepower requirements.

Visit Test Center »